High-performance Sevan Drive with adjustable aluminum transom bracket, built for high performance with the scale look. These come in 3 different color schemes, all with a metal lower unit. Designed and manufactured in Europe.We categorized this as a drive, instead of an outboard, because the motor is not contained within the outboard. When you install this unit in your hull, you will mount your motor inside of the hull. Then the flex cable is run in a traditional stuffing tube and run into the front of the drives bullet (see picture 3). The flex cable will have less strain and be able to spin at high rpm than most rc outboards on the market.
Available in three color schemes. See picture 2. -Grey Cowl with Black lower -Red Cowl with black lower -Grey Cowl with Silver lower Specs:Length: 110mm (4.33"), not including bracketWidth of servo arms: 55mm (2.16")Width of outboard cover: 52mm (2.05")Height: 165mm (6.50")Weight: 182g (6.4 oz)Prop size: Will fit up to 44mm diameter prop. Which exact prop will depend on setup.Mounting Bracket: 35mm wide x 30mm tallShaft: For 3/16" diameter propellers
Includes: Everything in picture one. Requires:.187 (4.76mm) Flex cable and it to be glued into the prop shaft. For info on how to do that, click here.Propeller: 3/16" (4.75mm) shaft, We recommend the cnc series. Prop nut: 4mm threads. Hull: Recommended setup for a 30" (760mm) to 35" (900mm) length boat in the 3-5 pounds total weight range. Motor: 3650 to 4074 sized brushless motor.K&S Stuffing Tube: 8132Teflon: .187 Size Operation Instructions: This item ships without oil in the case. it is necessary to fill the case with a oil similar to 75W90. We suggest replacing the oil after each days use.
