CNC Prop 42mm - 3/16 bore

Name: CNC Prop 42mm - 3/16 bore
Brand: TFL-parts
SKU: cnc-4214250
Price: 19.95 USD
Availability: InStock
Rating: 4.8 (8 reviews)

Product ID cnc-4214250

In Stock 36

Price: $19.95

CNC 4214 Magnalium 7075 propeller.

Machine cut to high tolerances makes this prop ready to use right out of the box. The Magnalium 7075 alloy makes this material upwards of 30% stronger than standard 7075 aluminum.

Left hand rotation. These spin counter clockwise when looking at them from the back of the boat.

Fits 3/16"(.187" 4.76mm) Smooth Bore Propeller Shafts.

Diameter	Total Pitch
42mm (1.65")	2.32"

Note:
-BlackJack 24 RTR Boat, check the shaft size to make sure its 3/16"(4.75mm), not 5mm.
-ProBoat Ul-19, this prop is for 6s use with the stock boat.

8 Product Reviews - Average rating 4.8 / 5 (Show All)

fast prop

bj24 - 24th September 2024

Ive been using this for a while. great prop.

Great prop

RC rider - 11th January 2022

This is a great prop for the UL19. I have hit 57mph so far with it and the boat had a lot more in it. No overheating whatsoever.

great prop

rtr guy - 29th April 2020

The guy at ose recommended this prop for my proboat Ul-19. What a difference this made. I had first started out with a octura x442 on it for 6s but I didn't know how to balance it, so there was lots of vibration. This cnc prop from ose is awesome. I used read more

Must Have For RC Boats

John Cullivan - 08th April 2020

I bought 2 props, 1 for my 29" Geico and one for the smaller Black Jack boat. It had to have added 5 mph on the Geico boat and close to the same on the Black Jack. They fit perfectly on both shafts. No need for any machining. There was definately read more

Nice prop, but center bore tolerances are off

OldKid - 29th December 2019

I have this prop on both my Traxxas M41, and Miss Vegas Deuce electric conversion. Prop is a good performer in the water, but the center bore was not at 3/16 on either prop. Had to force the one on MVD with the prop nut, and ream out the bore for the M4read more

Blackjack 24

Millertime - 01st August 2018

Installed this prop on the blackjack 24 higher top end speed engine and esc didnâ€™t run any hotter and seems like I get a little longer run times on the battery, great prop for the price

« Previous | Next »

We don't currently have that one in stock

CNC Prop 42mm - 3/16 bore

You May Also Like