150A Power Analyzer. This logger can analyze the Battery condition, capacity, current draw, motor rpm and the run time of your boat in the water and on the bench. This will make setup of your boat an easier task without guessing. This has a maximum amp draw of 150 amps, Max 26 volts.
Power Analyzer Manual ( Power Analyser(EN).pdf )
Power Analyser-Portable LCD Operation Pane Manual(EN) ( Power Analyser-Portable LCD Operation Panel(EN).pdf )
This is fully compatible with the Etti 45a Navy, Etti 70a Navy, Etti 90a Navy, Etti Race 150, Etti Race 150 bec. At this time this can not be used with the HV100.
This can also be used with other esc's to log voltage, current and other functions, but the rpm will not be logged.
HV 250A Power Analyzer It can analyze the Battery condition, capacity, coulometry, current drawn , motor rpm and the run time of your boat in the water. It can make you easier to set up the boat according to the data of Power Analyzer which the output current below 250A
Link for manual 60V 250A Power Analyzer User Manual (Eng) 20120331.pdf )
Click picture for full details.
This is the new MicroPower V4.
This is the New Eagle Tree USB Micro Power V4 150 Amp E-Logger. If your looking for the optimum prop for your boat or gearing for your car, than this is the product for you. With this logger will be able to graph(computer required) voltage and amperage curves! Add a optional brushless sensor for graphing rpm or optional gps speed sensor for the ultimate tuning advantage!
Logs pack current to 150 amps and voltage to 80 volts.
RCM Telemetry Device for Boats, Cars and Airplanes.
GPS measures speed and location on your Android device in real time. Includes 3 sensors that you can attach to any three items you want to measure the temperature of. Most times this will be valuable for measuring motor, esc and battery temps.
Click here for Link to Instructions and Android App
Want to view important data at the pond or tracking without having to drag the laptop? This works with the Eagle Tree Micro Data Logger to display that critical information you need!
Click picture for more details.
This is the new GPS V4 Module for the from Eagle Tree Systems.
Smaller, faster, and more sensitive GPS Expander Module plugs into the system to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated display/3D graphing software included in data system. WAAS and EGNOS compatible, 10Hz update rate, built-in patch antenna.
Requires: Eagle Tree V3
Click picture for more details and requirements.
This is the Eagle Tree Brushless RPM V2 Sensor. Simplly plug in one end and solder 2 wires and your done! Works with all versions of the Eagle Tree MicroPower, Seagull Flight Systems and Data Recorder V2 products with firmware version 4.XX
The eLogger V4 supports up to two Hall Effects or Brushless RPM sensors!
This is the Micro Temp Sensor for use with the Eagle Tree Data Recorder and MicroPower V2, V3.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! Up to three temperature sensors can be connected to the eLogger V3 simultaneously (two simultaneously for the V1/V2).
Requires: Eagle Tree Logger.
This is the Optical RPM Sensor for use with the Data Recorder and MicroPower V2
The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors!
Eagle Tree Logger.
Measures RPM to 50K+. Includes RPM sensor and 4 magnets.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors!
Requires: Eagle Tree Logger.
Not logged in
Help & FAQ
© Copyright 2017 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.