Large scale X Cat Outboard made by MHZ in Europe.
Includes: Outboard unit only. For a limited time we will include X Cat Decals for free.
See picture 2 for measurements.
Comes in two shaft sizes:
For 3/16", Outboard is black cowl and midsection with natural metal lower unit.
For 1/4", Outboard is completely black. (see picture 8)
Motor: No motor included. We suggest a 4092 sized motor in the kv of your requirements.
Height: 11" (280mm), See picture 4, green board is in inches.
Ounces: approx 22
Shaft size: 3/16" (4.75mm) or 1/4" (6.35mm)
Maximum prop size: 60mm diameter
Maximum motor watts: 4000
Material: Lower unit is Silumin (Lightweight, high-strength aluminum–silicon alloy) and the upper(black parts) plastic.
Left or Right rotation prop can be used.
Requires: 40mm diameter motor with 5mm diameter shaft and 25mm motor hole mounting spacing. Can fit upto 92mm long motor.
Notes: This is designed for scale boats in the 45" (1150mm) to 50" (1300mm) length range. 5-10 pounds total hull weight. Some pictures show motor with water jacket, there is no water pickup built into this drive. Propeller and 4092 motor are shown for display and size references only, no motor and no prop are included.
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.