Offset aluminum rudder and strut system for Catamarans with built in rudder water pickup. Features a nylon break away bolt on the rudder to reduce damage when hit by submerged objects.
Mounting plate measures 30mm (1.18") wide x 24mm (.95") tall.
Leading edge of the rudder blade measures 87mm (3.42")
Offered in 2 options.
- Rudder & strut only. No Cable, no stuffing tube. This is for people with their own cables/shafts.
- .187"(4.75mm) Flex Cable with 3/16"(4.75mm) shaft
System Includes the following hardware:
(1) aluminum rudder
(1) aluminum strut with installed 3/16" Lead Teflon Bearing Sleeve.
(1) 9/32 Stuffing tube
(1) ose-1191 assembled cable
Requires customer to cut flex cable to required length.
Note: This is similar to OSE-80978 but this a larger system for larger/heavier hulls. Picture 5 shows the hardware on the back of a 34" (865mm) TFL Cheetah. Boat not included!
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.