This micro strut can be used for a very small rigger, hydro or mono in the 10-15 inch range. Strut bushing is made for 1/8" prop shafts.
Can be used with the ose-80048 micro rudder.
We recommend the following items for this strut.
oct-oc098L-24c 1/8" prop shaft with flex cable and teflon.
dh-ks-brass-tb 3/16" K&S stuffing tube.
Note: When used with a mono/deep vee we suggest making a small standoff bracket to place the strut off the transom approx 5mm.
Comes in anodized silver aluminum.
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.