The all new ML Boatworks RSX380 38" FE Outrigger Hydroplane has finally arrived. ML Boatworks has toyed with the idea of introducing an outrigger into their stable for many years...well, the design, build, and testing is now completed, and we really like what we saw out on the water! This boat should be extremely competitive in the Q FE Outrigger Hydroplane classes (6s Lipo) as it can handle not only high end speeds will stability, on a rail type cornering, but it can also get you through the rough water we typically see on the race course.
Kit includes white fiberglass Cowl (requires trimming)
1. Build thread on OSE Forum. Must be a registered member to view these.
2. Build thread on OSE Forum. Must be a registered member to view these.
Instructions are downloadable by clicking here
Hardware Recommended, See bottom of this page for links to items:
-Speedmaster Sport 21 Hydro Rudder
-Large Speedmaster round bottom / hydro Strut
-40 size Turn Fin
-K&S 8131 1/4" stuffing tube if you are using .187 cable
-OSE-187L Flex Cable
-Zippkits 5/16" Solid Carbon Boom Tube Rods or equivalent pn# zip-5603
-Zippkits Long Boom Tube Sleeves- 5/16" pn# zip-3586
-Zippkits Boom Tube Collars- 5/16" pn# zip-3480
Motor: Leopard 4092 1730Kv or Tp-4070 1650 KV
ESC: Swordfish 300HV or ZTW 300
Battery: (1) 6s 65c 5000mah Lipo pack
NOTE: If you use larger than the suggested power, we suggest going to a larger 1/4" cable, 1/4" Strut and Larger stuffing tube.
To view the ML Boatworks RSX SERIES Build Manuals, please click the following link:
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.