Jet Drive by Mickie Beez
This pump is a good fit for flat bottom boats in the 23" (580mm) to 30" (750mm) range. This is a complete jet pump with a 7075 Aluminum impeller. These are far better built than the Graupner jet pumps that are on the market.
Everything shown in picture number 3.
Width: 40mm (1.57")
Height: 40mm ( 1.57")
Drive shaft is 4mm
Impeller : 30mm (1.18")
Impeller material: 7075 aluminum
Estimate max watts of 2000. For example 3650 or 4074 sized motors.
-36mm Diameter motor in the 20k-25k total rpm range.
The unit has been tested to 26,000 rpm, maximum thrust was obtained at 20,000 with a static thrust of 5.5 kg.
Email us with hull info if you have a particular application you need help with.
Not logged in
Help & FAQ
© Copyright 2017 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.