Keda 4074 Water Jacket, Long version.
This jacket is the only 40mm jacket that will fit the Keda 40mm Diameter Motors. Other 40mm jackets will not fit correct or not fit at all. This is short enough to be used with the ose-80600 and ose-80610 motor mounts.
This Water Cooling Jacket has been designed for maximum heat reduction. At 44.5mm(1.75") long, the jacket is long enough to cool the motor well. Yet weighs less than 2.25 ounces. We picked high quality aluminum for the jacket to further help with the cooling, as the aluminum acts as a added heat sink. Than we added brass water fittings that can be rotated to point in any direction.
Installation is a snap! Apply some oil/grease to your motor housing and the o-rings on the jacket, than slide on the jacket.
Approx. 1.55" (39.50mm) long x 1.70" (43.1mm) in diameter.
NOTE: When used with the ose-80600 or ose-80610 mounts in a flat bottom boat, IE a cat or hydro, you will have to raise the mounts for clearance. This only fits the KEDA 4074 motors. This will be to large of a diameter on other motors.
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.