Castle Creations 2028 Water Jacket.
Offshore Electrics designed in cooperation with HRC Machine, this jacket is specially designed to fit the Castle 2028 Motor that has cooling fins.
This Water Cooling Jacket has been designed for maximum heat reduction. At 3.3"(84mm) long, the jacket is long enough to cool the entire length of the motor windings. Yet weighs less than 5 ounces. We picked high quality aluminum for the jacket to further help with the cooling, as the aluminum acts as a added heat sink. Installation is a snap! Slip on the o-rings, apply some oil/grease to your motor housing and the o-rings on the jacket, than slide on the jacket.
3.3" (84mm) long x 2.65" (67.5mm) in diameter.
Note: As of 7/1/2017 we have changed the inlet and outlet to larger fittings to accept the ose 9/32 tubing for a higher flow rate.
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.