Castle Creations 1717 Water Jacket.
Offshore Electrics designed in cooperation with HRC Machine, this jacket is specially designed to fit the Castle 1717 Motor that has cooling fins.
This Water Cooling Jacket has been designed for maximum heat reduction. At 2.75" (70mm) long, the jacket is long enough to cool the entire length of the motor windings. Yet weighs less than 2.6ounces. We picked high quality aluminum for the jacket to further help with the cooling, as the aluminum acts as a added heat sink. Than we added brass water fittings.
Installation is a snap! Slip on the o-rings, apply some oil/grease to your motor housing and the o-rings on the jacket, than slide on the jacket.
2.75" (70mm) long x 2.30" (58mm) in diameter.
*Pictured is the 1520 Jacket on a 1520 Castle Motor, the jackets are similar and made the same way
Note: THIS WILL NOT FIT THE Traxxas/CastleCreations XO-1 Motor.
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.