HRC Rail mount for TP 40mm V1 Diameter motors.
These can be used to convert nitro/gas hulls to electric power. Slotted mounting holes for ease of alignment.
TP V1 motor TP 4050, 4060 & 4070 V1 Motors that come with 4 front end bell screws.
V1 Motors are the Newest design from TP, a three piece can design with front and back end plates screwed on.
Mounting screws (longer may be required if rails are thicker than normal).
Note: As of 12/10/2018 this is made for the V1 TP Series.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.