This is the Heavy Duty EZ Connector set by Dubro.
EZ Connectors link a pushrod to a servo arm allowing it to pivot for less bind in control surfaces.
FEATURES: Steel construction
Two steel E/Z connectors (drilled for 4-40 pushrod wire)
Two steel retaining washers
Two 4-40 x 3/16" cap head screws for securing pushrod wire
4-40 linkage pushrod.
3/32" allen wrench to tighten screws
3/32" hole in servo horn.
Rudder in picture not included!
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.